Isoliermaterial
Durchschlagfestigkeit (kV/mm) | Elektrischer Widerstand (Ω・cm) | |||
---|---|---|---|---|
Keramik | Hochleistungskeramik | Aluminiumoxid | >10 | >1014 |
Zirconiumdioxid | >10 | >1012 | ||
Siliciumnitrid | >14 | >1014 | ||
Aluminiumnitrid | >15 | >1014 | ||
Siliciumcarbid | – | >106 | ||
Cordierit | 7 | 1013 | ||
Mullit | >10 | 1014 | ||
Steatit | 18 | 1014 | ||
Calciumoxid | – | – | ||
Magnesiumoxid | – | >1014 | ||
Sialon | >15 | >1015 | ||
Bearbeitbare Keramiken | Macerite HSP | >10 | 5×1015 | |
Photoveel II | 35 | 2.2×1015 | ||
Photoveel II-S | 30 | 1014 | ||
M-soft | 40 | 1012 | ||
BN HC | 25 | 1015 | ||
BN N-1 | 25 | 1015 | ||
BN NB-1000 | 22 | 1015 | ||
BA | 21 | 1014 | ||
SBN | 27 | 1014 | ||
Glas | Universalglas | – | – | |
Hartglas | – | – | ||
Tempax, Pyrex | – | 1015 | ||
Neoceram | – | >1013 | ||
Quarzglas | >10 | >1014 | ||
Baycol | – | 1017 | ||
Saphir | >10 | >1014 | ||
Ziegel | Gewöhnlicher Ziegel | – | – | |
Ofenmaterial (Innenraum) | – | – | ||
Ofenmaterial (Isolierstein) | – | – | ||
Zement | Universalzement | – | – | |
Feuerfester Zement | – | – |
Durchschlagfestigkeit (kV/mm) | Elektrischer Widerstand (Ω・cm) | |||
---|---|---|---|---|
Metalle | Metalle mit hohem Schmelzpunkt | Wolfram | – | 5.5×10-6 |
Molybdän | – | 5.7×10-6 | ||
Tantal | – | 12.4×10-6 | ||
Niob | – | – | ||
Hitzebeständiges Metall | SUS310S | – | 90×10-6 | |
SUH445 | – | 60×10-6 | ||
Inconel 600 | – | 103×10-6 | ||
Standard-Metalle | SUS316 | – | 74×10-6 | |
SUS304 | – | 71×10-6 | ||
Eisen | – | 19.5×10-6 | ||
Aluminium | – | 2.7×10-6 | ||
Kupfer | – | 1.7×10-6 |
Durchschlagfestigkeit (kV/mm) | Elektrischer Widerstand (Ω・cm) | |||
---|---|---|---|---|
Kunststoffe | Technische Kunststoffe | Polyimid (PI) | 23 | >1014 |
Polybenzimidazol (PBI) | 23 | 2×1015 | ||
Polyamidimid (PAI) | 23 | 2×1015 | ||
Polyetherimid (PEI) | 24 | 1017 | ||
Polyacetal (POM) | 20 | 1×1014 | ||
Polyphenylensulfid (PPS) | 15 | 1.6×1016 | ||
Polyetheretherketon (PEEK) | 19 | 1016 | ||
Polytetrafluorethylen (PTFE) | 19 | <1018 | ||
Polymid 6 (PA6) | 31 | 1014 | ||
Ultrahochmolekular-gewichtiges Polyethylen (UHMWPE) | – | >1013 | ||
Standard-Kunststoffe | Polyethylen (PE) | 40 ~ 50 | 6×1018 | |
Polypropylen (PP) | 31 | >1016 | ||
Vinylchloridharz (VC) | 37.5 | >1016 | ||
Polystyrol (PS) | 20 ~ 28 | – | ||
Polyethylenterephthalat (PET) | 22 | >1016 | ||
Acrylnitril-Butadien (ABS) | 14 ~ 20 | 1 ~ 4.8×1014 |
※Die angegebenen Daten dienen nur als Referenzwert.